Re: 1968 Suburban K20 Past & Present build
The fuel tank.
Back when I can't remember, but at some point my Dad had installed a second 25 gallon tank. So in the back there were two 25 gallon tanks, and were filled with a custom made Y fill pipe. The tanks were changed with a manual valve on the drivers side floor right where the seat adjuster lever was, and the fuel gauge was actuated with a toggle switch to check what level each tank had.
To simplify my restoration, I decided to rip all of that out and go with the OE single 25 tank.
I think about having a custom larger capacity tank made, but that is a future project when everything else is done with the original plan on the truck (oh, and life in general permits).
__________________
Chris
1968 K20 Suburban
1972 K10 LWB PU
Last edited by vectorit; 06-28-2016 at 09:54 PM.
|