The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jjzepplin · 02-20-2018, 07:39 AM

I welded mine up and put a 1/4" steel washer on the inside of the frame and welded that in. I then replaced the outer bracket with 1/4" steel. (4x4) But could be done with 2x4 too. Then a nice grade 8 bolt and no stud necessary.
They will never waller out again.

02-20-2018, 07:39 AM	#8
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,546	Re: Front shock mounting bolt I welded mine up and put a 1/4" steel washer on the inside of the frame and welded that in. I then replaced the outer bracket with 1/4" steel. (4x4) But could be done with 2x4 too. Then a nice grade 8 bolt and no stud necessary. They will never waller out again. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350 Last edited by jjzepplin; 02-20-2018 at 08:01 AM.