The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - HOW TO: Replace Interior and Exterior Door Handles (1997 Yukon GT)

Weekend_warrior · 11-25-2008, 11:49 PM

I just poped the switch unit off from the pannel without disconnecting the wires. You can just use a screw driver on the end the faces the latch. You will see where it clips in. You just get a smaller flat blade and push in a up a bit and it will come loose.

I think the connectors have a clip, but can't recall.

11-25-2008, 11:49 PM	#16
Weekend_warrior Registered User Join Date: Nov 2008 Location: Lubbock, Tx Posts: 1	Re: HOW TO: Replace Interior and Exterior Door Handles (1997 Yukon GT) - with pix I just poped the switch unit off from the pannel without disconnecting the wires. You can just use a screw driver on the end the faces the latch. You will see where it clips in. You just get a smaller flat blade and push in a up a bit and it will come loose. I think the connectors have a clip, but can't recall.