[kljfamily]

The t- case is still winning.

Last night we went to but the t-case and 4wd selecter/actuator into neutral.

On the t-case the half moon goes in the lowest 6 o clock position. I plugged in the actuator to the harness but did not have it installed on the t-case. Turned the car on and everything was fine..no 4wd service lights and 2wd selected. So I pressed the 4H to test and the actuator moved...cool. pushed 4l and it moved again. I then went to hit neutral holding the 4l and 2H buttons and the lights went out and the service 4wd came back on. Tried turning it off and on, removing the battery cable, pulling fuses ect with no avail.

Any ideas? Could be the actual switch went out on the dash? They all light up when I start but then go out. Tried my code reader and got a c0327 which is the encoder. There has to be some way of resetting this thing as it was working fine just before going out.