Quote:
Originally Posted by regan56
I could yes....if i knew i could find the rotors i wanted and that fits my stock '56 spindle.The 5/8 stud might be a deal killer as i dont think those will fit the slots in my rims. I didnt have a 5/8 bolt on hand but a 1/2" is pretty close to using up all the 'extra' room there is.
|
All kits use the 70-78 Camaro rotor. Speedway has them drilled in different patterns. The rotor does not fit your spindles directly, an inner bearing adaptor has to be used. It's either the 70-78 Camaro rotors or the 6 lug kit that re-uses your drum hubs, that's all that is available for your stock spindles.
You might find a 1/2" lug stud with a knurl that could be used to substitute the 5/8 studs but you won't know that until you have the rotors in hand and measure the existing hole size. If you want 5 on 5 that's what your choices are.
If you're using alum wheels you can redrill the holes for the larger size, should be done on a vertical mill