|
Re: 1970 C10 Suburban Trans Issue
-
I don't know about the shifting problems but as far as the indicator not lining up, if not caused by any internal trans problem it would be the rod adjustment under the hood.
Be sure and block your wheels before you start this.
Open the hood and loosen the adjustment bolt at the top of the rod that connects the transmission and the shifter arm on the steering column, crawl under the truck and manually shift the transmission into Park. Hold it in Park while someone puts the shift lever in the park position up above, then tighten the adjuster bolt back up. This should correct your alignment problem. Below is a picture of the adjustment bolt.
LockDoc
|