The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**dmb** · 02-25-2024, 08:46 PM

the detent cable ib not adjusted , it is all the way in , it would act like it was at wot all the time. pull up the plunger and hold the throttle wide open then push the plunger down

02-25-2024, 08:46 PM	#12
dmb Active Member Join Date: Sep 2023 Location: randolph va Posts: 131	Re: 350 wont shift out of first... the detent cable ib not adjusted , it is all the way in , it would act like it was at wot all the time. pull up the plunger and hold the throttle wide open then push the plunger down