The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - TN sbc engine bottom end crank / rod oil scraper

BCOWANWHEELS · 09-11-2019, 06:21 PM

if anybody wants 1 let me know. its made for gen 1 350.s but will work with all sbc,s with minor fitting. price $ 25.00 . all water jet cut out. fitment is very precise to about 1/8 in or less to crank and rods for stock crank and gm rods with ARP rod bolts as seen but can be modified for aftermarket components / strokers etc.
bob

09-11-2019, 06:21 PM	#1
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	sbc engine bottom end crank / rod oil scraper if anybody wants 1 let me know. its made for gen 1 350.s but will work with all sbc,s with minor fitting. price $ 25.00 . all water jet cut out. fitment is very precise to about 1/8 in or less to crank and rods for stock crank and gm rods with ARP rod bolts as seen but can be modified for aftermarket components / strokers etc. bob Attached Images __________________ I BELIEVE IN JOHN 3:16 Last edited by BCOWANWHEELS; 09-19-2019 at 03:45 PM.