The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

NoNeck · 05-18-2017, 12:53 PM

After collapsing my share of metal tubing over the years I came up with a shade tree solution that worked for me. I had a length of braided accelerator cable left over from an earlier job. I inserted the cable into the full length of the fuel line that I was bending. The bends came out perfect and the cable was easy to pull out after all the bends were made.

I know there are other tricks out there for bending fuel/brake lines, but I really like this one.

POP

05-18-2017, 12:53 PM	#1
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,105	Fuel Line Bending Tip After collapsing my share of metal tubing over the years I came up with a shade tree solution that worked for me. I had a length of braided accelerator cable left over from an earlier job. I inserted the cable into the full length of the fuel line that I was bending. The bends came out perfect and the cable was easy to pull out after all the bends were made. I know there are other tricks out there for bending fuel/brake lines, but I really like this one. POP Attached Images __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.