Quote:
Originally Posted by 1project2many
Sometimes it's possible to trick the valve into moving with a shot of air applied to a bleeder. Sometimes letting the vehicle sit overnight is enough to cause it to move off its seat. Either way, if the valve moves the next step is to gravity bleed. Applying pedal pressure will only re-seat the valve and you will end up right back to where you started.
|
Evidently the valve must be spring-loaded because it did reset itself overnight. At least that's what I guess by hooking a test light to it: no light = no ground. So now I'll do what you suggested and gravity bleed to equalize fluid in the front and rear. But I'll probably also use the trick little tool. Thanks!