The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Franks 72** · 07-19-2019, 04:28 AM

A few years ago someone steered me to a Rotisserie plan on the web. Plans were very professional and design was strong enough for our large project with clear instructions and I ended up with one. Unfortunately I didn't keep a copy of the plans and now don't see them on the web. Can anyone point me to the site of provide a copy A few clues, I remember . All cut lengths were provided, most material was DOM , rotary head portion called for lathe turning of the pivot due to possible distortion in welding process. Many thanks!

07-19-2019, 04:28 AM	#1
Franks 72 Active Member Join Date: Mar 2013 Location: Ottawa Ontario Canada Posts: 134	Rotisserie Plans A few years ago someone steered me to a Rotisserie plan on the web. Plans were very professional and design was strong enough for our large project with clear instructions and I ended up with one. Unfortunately I didn't keep a copy of the plans and now don't see them on the web. Can anyone point me to the site of provide a copy A few clues, I remember . All cut lengths were provided, most material was DOM , rotary head portion called for lathe turning of the pivot due to possible distortion in welding process. Many thanks! Last edited by Franks 72; 07-19-2019 at 05:02 PM.