The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Electric Cooling Fan How-to

memphismatt · 01-02-2010, 07:06 PM

Thanks for the compliments.

restorob: the inside diameter is 21" and is the same on my '96 'burb. its getting the electric fan too, after a new engine.

jb1016: the t-stat i had in the truck was the 160 degree unit. After the weather cooled down, It caused me to lose some gas milage and made to truck run bad below 1500 rpm. I had to change the t-stat back to the 195 and replace the temp switch with a 200 on, 185 off. it is the closest one i can find and i'm not sure if its going to work like i want it to. i'll let you know in a coupla weeks.

01-02-2010, 07:06 PM	#11
memphismatt Registered User Join Date: Aug 2007 Location: Independence, MS Posts: 61	Re: Electric Cooling Fan How-to Thanks for the compliments. restorob: the inside diameter is 21" and is the same on my '96 'burb. its getting the electric fan too, after a new engine. jb1016: the t-stat i had in the truck was the 160 degree unit. After the weather cooled down, It caused me to lose some gas milage and made to truck run bad below 1500 rpm. I had to change the t-stat back to the 195 and replace the temp switch with a 200 on, 185 off. it is the closest one i can find and i'm not sure if its going to work like i want it to. i'll let you know in a coupla weeks. __________________ '68 C 10 short step '92 C1500 RCSB '92 C3500 ECDRW '96 C1500 ECSB Last edited by memphismatt; 01-02-2010 at 07:09 PM.