Quote:
Originally Posted by 68 TT
The 4L80E is 3" longer than the T-400 and the adapter plate is 1-1/4" thick so it will move the TC shifter back about 4-1/4".
An offset shifter handle may be able to take care of some of that but I don't know if it will be able to compensate for all of it. We will see.
I'm converting from an SM465 so mine will be moved quite a bit from the stock location.
|
I am looking at the 4L60 which is shorter than the 4L80
A 350 is 21 5/8 to the flange
a 700R4 is 23 3/8 to the flange
a 4L60 is 21 3/4 and add the 1.5 inch adapter and it will be 1/8 shorter than a 700R4. The 700R4 is 1 3/4 inches longer than the TH350.
you can check my measurements
HERE and I posted the link to the 1.5 inch adapter in my earlier post.