|
Re: Help! need steering box for '67 C10
Quote:
Originally Posted by BigTopGT
Bringing this back from the dead to ask: does anyone have a pic of the 67 frame before and after being dimpled?
I’ve got a ton of slop in my steering box and need to do something about it sooner than later.
|
Advance auto . order online for the discount and use local pickup. as far as dimpling the frame it takes very little , I just made 2 relief cuts and used some heat to make it fit without beating up the frame and stitched welded it back . Don't use washers or spacers . the drivers side core support bracket needs to be clearanced some on the 67 frame for the steering gear to fit . use a new Lares 201 steering coupler , Double check the fit of the coupler at the store . 
https://shop.advanceautoparts.com/p/...chTerm=27-7501
https://shop.advanceautoparts.com/p/...Term=lares+201
__________________
1967 Factory short bed - Old school
'71 - 350 / 4bolt / 487 heads / Edelbrock C3BX
Muncie M-22 4 speed / Hurst Comp plus
Factory 12 bolt posi 3.73 / 255-70-15
Smoothed firewall / Factory cowl induction
Power disc brakes / power steering / 3.5-5" drop
Last edited by Grumpy old man; 04-19-2020 at 10:19 PM.
|