The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Steering Column drop mount for 47-54 pictures.

b-mac · 02-12-2018, 01:34 PM

I tried to find a good picture of mine, but I couldn't. So I used my mad paint skills to draw up the plans. Not saying I did it right or wrong. I basically just bent some 1/8" plate into a "C"-ish shape, to hit the lower lip of the dash, and that factory dash brace. If I remember right, because of the movement of the column from slightly offset, to centering b/t the gauges, the bracket I made is wider than it would need to be on one side.

02-12-2018, 01:34 PM	#5
b-mac Registered User Join Date: Mar 2014 Location: Wichita Posts: 516	Re: Steering Column drop mount for 47-54 pictures. I tried to find a good picture of mine, but I couldn't. So I used my mad paint skills to draw up the plans. Not saying I did it right or wrong. I basically just bent some 1/8" plate into a "C"-ish shape, to hit the lower lip of the dash, and that factory dash brace. If I remember right, because of the movement of the column from slightly offset, to centering b/t the gauges, the bracket I made is wider than it would need to be on one side. Attached Images Last edited by b-mac; 02-12-2018 at 01:48 PM.