The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BabyBlue64 · 09-24-2018, 10:51 AM

1st thing you can try is disconnect the bulkhead connector from the wiring that goes into your hood. It has 3 connections. 1 for parking lights 1 for left and 1 for right turn signal. If you take a wire and connect that to the + of your battery you can hold it to the each connector to see if the lights go on. If that is the case, you know that everything in the hood is good. It will also indicate you have good ground. Than your problem is under the dash.

09-24-2018, 10:51 AM	#7
BabyBlue64 Registered User Join Date: Dec 2016 Location: Noordwijkerhout, Netherlands Posts: 56	Re: Frustrating turn signal 1st thing you can try is disconnect the bulkhead connector from the wiring that goes into your hood. It has 3 connections. 1 for parking lights 1 for left and 1 for right turn signal. If you take a wire and connect that to the + of your battery you can hold it to the each connector to see if the lights go on. If that is the case, you know that everything in the hood is good. It will also indicate you have good ground. Than your problem is under the dash.