The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - progress so far, and adive on setting caster and camber

demian5 · 05-30-2018, 04:08 PM

Have a shop do it. Ask for as much + (positive) caster as they can put in it. You can even put new shafts in the arms and install them a slight off center (lower arm to the front, upper arm to the rear) to give more + caster. This gives the vehicle better stability at high speeds.

05-30-2018, 04:08 PM	#4
demian5 Registered User Join Date: Aug 2016 Location: Lake Forest, CA Posts: 2,177	Re: progress so far, and adive on setting caster and camber Have a shop do it. Ask for as much + (positive) caster as they can put in it. You can even put new shafts in the arms and install them a slight off center (lower arm to the front, upper arm to the rear) to give more + caster. This gives the vehicle better stability at high speeds. __________________ "Work hard, use your vacation days." 1970 C15 GMC Long Bed 1986 C20 Scottsdale 1983 K2500 Sierra Classic Suburban 6.2 Instagram: C10sofOC