Re: Remote solenoid install by pictures
Sorry but it's not. The 2 big terminals have nothing to do with the two small terminals as far as what passes through them they are seperate circuits. If the battery cable is on one terminal and the other side is a on/off how can this be a full circuit?
The battery cables should hook to each big terminal. One in from battery then one out to starter. Then one small ignition wire to solenoid from key then out to ground. This will give you straight battery to starter the key switch has nothing to do with it. It's just to turn the slonoid on/off. I have been hooking solenoids up for years. I have never seen this before.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71
Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour
http://upstategmtrucks.com/
Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
|