The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

1project2many · 04-17-2017, 09:05 PM

Centrix shows most of the parts including pads, rotors, and calipers. https://centricparts.centriccatalog....&uid=ANR&sid=0

It appears that cables are available on Ebay. http://www.ebay.com/itm/190822088750?rmvSB=true

As far as swapping parts from another application, the answer would be to compare the original rotor hat depth with others and try to build a kit around those numbers. The S10 rear disc is different for certain:

Camaro:
https://centricparts.centriccatalog....7&i=1&uid=ANR&

Blazer 2WD:
https://centricparts.centriccatalog....7&i=1&uid=ANR&

If you want to swap rear axles the best choice may be a ZR2 optioned S10 axle. It has an 8.5" differential and is wider than the 2wd version.

04-17-2017, 09:05 PM	#2
1project2many Registered User Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,152	Re: What Rear End to Use? Centrix shows most of the parts including pads, rotors, and calipers. https://centricparts.centriccatalog....&uid=ANR&sid=0 It appears that cables are available on Ebay. http://www.ebay.com/itm/190822088750?rmvSB=true As far as swapping parts from another application, the answer would be to compare the original rotor hat depth with others and try to build a kit around those numbers. The S10 rear disc is different for certain: Camaro: https://centricparts.centriccatalog....7&i=1&uid=ANR& Blazer 2WD: https://centricparts.centriccatalog....7&i=1&uid=ANR& If you want to swap rear axles the best choice may be a ZR2 optioned S10 axle. It has an 8.5" differential and is wider than the 2wd version. Last edited by 1project2many; 04-17-2017 at 09:11 PM.