The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - For those of you who've done a power disc swap how'd you extend the pushrod???

k1rodeoboater · 09-13-2011, 12:04 AM

...so in theory...if I were to cut the eye off of my booster, then take a 3" 7/16x20 bolt and weld it onto the end of the booster rod (after measuring to make sure where I weld it up will be the correctish spot) I should be golden then. That way I can retain the stock part of the clevis, have it attached to my booster, and also have it adjustable (somewhat, basically 1/2 turn at a time.)

It's gonna be fun pulling the booster out and figuring out how to keep the MC hooked up.

09-13-2011, 12:04 AM	#8
k1rodeoboater Registered User Join Date: Nov 2010 Location: Fayetteville NC Posts: 752	Re: For those of you who've done a power disc swap how'd you extend the pushrod??? ...so in theory...if I were to cut the eye off of my booster, then take a 3" 7/16x20 bolt and weld it onto the end of the booster rod (after measuring to make sure where I weld it up will be the correctish spot) I should be golden then. That way I can retain the stock part of the clevis, have it attached to my booster, and also have it adjustable (somewhat, basically 1/2 turn at a time.) It's gonna be fun pulling the booster out and figuring out how to keep the MC hooked up. __________________ 1966 C10 Long step build on a budget http://67-72chevytrucks.com/vboard/s...d.php?t=445201 no garage, no shop, limited storage space and tools....no problem.