View Single Post
Old 11-28-2013, 01:42 PM   #34
Step'67
Registered User
 
Step'67's Avatar
 
Join Date: Mar 2012
Location: Nampa, ID
Posts: 96
Re: Plasti Dipped the '67

Yah that is one drawback, you'd have to be careful if you sprayed the inner bed. Depending on what you put back there, it might not hold up to well. What I did was mask off the inside of the bed, right on the line where the bed rails take a 90 and turn into the bed walls. Then when I sprayed, I feathered the edge so despite Plasti Dip's slight thickness, it's nice and smooth. Then you could go back (or do it in the first place) and paint it even temporarily. My inner bed is black and the contrast with the silver looks pretty good so I left the bed for now, at least until I get to replacing the wood.
__________________
'67 C-10 Stepside 355/4l80e
Step'67 is offline