The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Jcfcamaro** · 06-07-2018, 01:43 PM

I have a small pot from orscheln farm supply and it takes alot of air. I only do the pitted areas and hard to get areas. Other than that I just use a sander with 40/80 grit paper. You have to be real careful when going over thin metal and you'll have to make several passes to keep the heat down. It can be done through.

06-07-2018, 01:43 PM	#6
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,051	Re: Sandblasting...Newbie ? I have a small pot from orscheln farm supply and it takes alot of air. I only do the pitted areas and hard to get areas. Other than that I just use a sander with 40/80 grit paper. You have to be real careful when going over thin metal and you'll have to make several passes to keep the heat down. It can be done through.