Quote:
Originally Posted by RedRoad
with a semi floater if the axle breaks you loose a tire as the axle is held in with a c clip at the diff side. On a full floater you can remove the entire axle just by unbolting it from the hub and sliding it out, the hub/bearings/brakes/tire still are secured and will roll if need be.
The SF 14 bolt comes in both 6 and 8 lug versions while FF only comes in 8 lug. If keeping the 6 lug I would swap in the SF as it is much stronger than the factory 12 bolt
|
So, would it be possible to swap a 6 lug shaft into a FF?
Posted via Mobile Device