[VonDog]

Put this on the sidelines for a while but still need pics. Background: I installed a new front cable and according to the service manual, there should be 1 long and 1 short guide on the pass. side. Adjuster and 1 short guide on the driver side (see pic).
My problem is: I can get the drivers side on with some force but No Way on the passenger side. I have the adjuster loosened as much as possible. Even been to several junk yards with no luck. Plus, the guides have to go on the bottom of the "C" frame and not on the side like the pic shows due to where the rear cables start. I'm guessing the guides are hardened steel and am about to make my own unless I can get this figured out. It's kicking my arse!