Re: need primer advice
I thought I had told you must have been another member, start off with 80 grit then go 120 once you think your close followed by 180 or 220 grit to smooth out he areas around. your panel my panel any ones panels that are first sanded with 220 [ on the body work] are gonna look worse than crud. Sand with some 80 first then put some on a stir stick and work with that a while. After there are what you think is close then spray another stripe[since that will do] of high build and see where you stand. After working those spots again with the right type of paper you will have a lot better understanding of whats needed and what you will have to do from there.
Don't give up on this thing and just go flat, unless you like those then by all means go ahead but still lets work on getting the body spots in better shape. Jim
|