[badherb]

More on the EC motor mounts. If you have never done them here was my attack on it. I got my one inch spacers cut to length and then drilled them out. I put the whole system on the engine and put the thing in place. I tack welded my spacers into place then lifted the engine out. I then put the perches on my spacers. I drilled out the holes needed then reinstalled them on the engine. I then lifted the engine into the bay and slid everything into place. I paid particular attention to placement of engine regarding level side to side and ensuring the tranny cross member allowed me to place the engine where I wanted it front to aft. over all I will enjoy this EC system.