Quote:
Originally Posted by bowt1ed
Russ, correct. I attached the end with the deeper offset bend at the rear cross support with a nutsert. It fit like it was meant to be there. I cut the end with the shallower offset bend off and welded a 90 degree plate that slides under the front brace/bracket, drilled a couple of holes. Although, the rear is a bit closer than the front, mine doesn't press against the hood. If yours does, you might want to try the other end.
Cheers, Jim
|
Thanks Jim. I think the deeper offset fits better, as I did try the other end. I guess some tweaking will be required, but will be well worth the fix. Appreciate the help.