The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

whytry85 · 09-19-2015, 10:30 PM

Got a little bit done today. Axle brackets all welded up. Scored a high hump tunnel off eBay since I couldn't stick a piece of welding wire between the trans and floor before. Also, got the shock mounts situated. With the way they were intended to be setup, the shock bushings were in a little bit of a bind when laid out. Still need to weld the stock shock holes and metal finish them but... Better than nothing.

09-19-2015, 10:30 PM	#22
whytry85 Registered User Join Date: Aug 2005 Location: Henderson, Tx Posts: 211	Re: Project: 3rd times a charm: 83 c10! Got a little bit done today. Axle brackets all welded up. Scored a high hump tunnel off eBay since I couldn't stick a piece of welding wire between the trans and floor before. Also, got the shock mounts situated. With the way they were intended to be setup, the shock bushings were in a little bit of a bind when laid out. Still need to weld the stock shock holes and metal finish them but... Better than nothing.