The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

1low71 · 12-22-2007, 04:39 PM

Thanks for the good responce.
I can't find all of my good cross member pics but here are a few.
I moved the crossmember up 2 inches and forward 1 inch to center the wheel in the well a little better. I also moved the steering box up and forwad 1 inch as well. I built my trans. mount to be like the Early Classic Ent. with 4 inch holes for exhaust. There is about 12 inches of c-notch in the rear. I'm going to look for the pics of my crossmember because there was alot of work done to it.

Thanks
Kevin

12-22-2007, 04:39 PM	#53
1low71 Registered User Join Date: Nov 2004 Location: ohio Posts: 36	Re: What do you think? c10 on 22's Thanks for the good responce. I can't find all of my good cross member pics but here are a few. I moved the crossmember up 2 inches and forward 1 inch to center the wheel in the well a little better. I also moved the steering box up and forwad 1 inch as well. I built my trans. mount to be like the Early Classic Ent. with 4 inch holes for exhaust. There is about 12 inches of c-notch in the rear. I'm going to look for the pics of my crossmember because there was alot of work done to it. Thanks Kevin Attached Images