View Single Post
Old 05-30-2010, 07:01 PM   #6
Registered User
geezer#99's Avatar
Join Date: Aug 2009
Location: Bowser
Posts: 12,033
Re: HEI install question (wiring)

I just finished putting an HEI on my 230 six banger this afternoon. Disconnected the yellow wire off the solenoid and the wire off the coil and taped them up real good. Ran a new 12 gauge wire with a 30 amp in line fuse and connected it to an unfused connection on my fuse panel. Fired right up. Set the timing at 12 degrees and went for a spin around the block. Took about 2 hours.
geezer#99 is online now   Reply With Quote