[Bennett68C10]

Got the rear back under the burb this weekend. I also decided to run the TT2’s I had from the 68 on the Burb. Was worried about them fitting in the rear due to the 5.75” backspacing the wheels have and the narrow rear. My worries were confirmed when I bolted them up, I’m going to have to run a 1/2” spacer so they will clear the inside of the wheel wells. I’m probably going to have to change the wheel studs to run the spacers but I’ll figure that out once the spacers come in. I also got the Wilwood calipers bolted up to the captain fab d52 brackets.