[skorpioskorpio]

Finally got the front brackets all sorted out. I worked with Kore3 to come up with the extra beefy bracket setup for the CPP modulars and my billet hubs. I had to mill the outside surface flat and consistent on the spindles and through a series of spacers am able to sandwich 2 sets of adapter brackets which should eliminate any concerns of caliper chatter. They are just finger tight together in the pictures so if they don't look perfectly unsquare that's why. The typical setup would only use the bracket furthest from the caliper and what I felt was an uncomfortably long spacer, compounded by what would be another 3/4" to compensate for my hubs. This setup is really really solid.