The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project-GMC Slant Nose

VDOG · 08-09-2012, 12:27 AM

Started removing the heads today. Purchased Metal Rescue from Home Depot. I saw it on one of those shows on the PowerBlock. Got the heads soaking in it to see if the surface rust comes off. Still not sure if im going to keep the 327 but I need this truck to move under its own power and if I have to rebuild, it wont be whats in there now. Cylinder walls dont look bad, but you can see the rust on the gasket where the head ports were sitting and some of the head bolts.

08-09-2012, 12:27 AM	#11
VDOG Grand PooBaa Member Join Date: Jan 2001 Location: LA, CA Posts: 5,302	Re: Project-GMC Slant Nose Started removing the heads today. Purchased Metal Rescue from Home Depot. I saw it on one of those shows on the PowerBlock. Got the heads soaking in it to see if the surface rust comes off. Still not sure if im going to keep the 327 but I need this truck to move under its own power and if I have to rebuild, it wont be whats in there now. Cylinder walls dont look bad, but you can see the rust on the gasket where the head ports were sitting and some of the head bolts. Attached Images