The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

MASTERBrian · 07-29-2017, 08:46 PM

Maybe I'm confusing terms on the engine balancing issue. He didn't add weights, he drilled some holes to take material out, he did stop me and ask when I called him regarding my engine and then said ok. The balancer also had to be replaced and if I'm not mistaken he removed some material there as well. Do I need to be concerned?

Back to the starter....

The positive cable goes to a junction block from 90s c1500. Then it goes to the starter. The ground is on the factory location for this motor, which is a bracket, but everything I've tested gives it good connection and I believe good ground. I'll try to upload some pics on while. I don't know voltages and can't get until I have a working starter. The battery is a 750cca starter.

07-29-2017, 08:46 PM	#15
MASTERBrian Registered User Join Date: Jan 2017 Location: Wichita Posts: 639	Re: Starter problems and now flex plate Maybe I'm confusing terms on the engine balancing issue. He didn't add weights, he drilled some holes to take material out, he did stop me and ask when I called him regarding my engine and then said ok. The balancer also had to be replaced and if I'm not mistaken he removed some material there as well. Do I need to be concerned? Back to the starter.... The positive cable goes to a junction block from 90s c1500. Then it goes to the starter. The ground is on the factory location for this motor, which is a bracket, but everything I've tested gives it good connection and I believe good ground. I'll try to upload some pics on while. I don't know voltages and can't get until I have a working starter. The battery is a 750cca starter.