The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - A different approach to a LWB to SWB conversion

Andy4639 · 04-19-2015, 10:09 PM

The weld is the same type of weld used in piping. Nuclear plants and any other plant use full pentration welds with beveled ends. No difference. Nice job man. Being a common weld with QC inspections for the full penitration. Certified welders can do this with no problems. As stated most people are not going to be certified in this type of welding. It takes years to gain this type of certifaction. It takes even more practice to keep it.

04-19-2015, 10:09 PM	#32
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: A different approach to a LWB to SWB conversion The weld is the same type of weld used in piping. Nuclear plants and any other plant use full pentration welds with beveled ends. No difference. Nice job man. Being a common weld with QC inspections for the full penitration. Certified welders can do this with no problems. As stated most people are not going to be certified in this type of welding. It takes years to gain this type of certifaction. It takes even more practice to keep it. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.