View Single Post
Old 05-10-2018, 04:02 PM   #56
dave`12
Registered User
 
dave`12's Avatar
 
Join Date: Sep 2015
Location: Lake Placid florida
Posts: 599
Re: Alternator question

Thanx.
That would be better, vette, but I've decided not to mess with the junction as it works and my solder, electric skills are such that I'm not inclined to mess with stuff that works

So, my ammeter should be good as is. My new output will go to the terminal. The old output, that I cut by the alternator and that is still hooked to the junction will also go to the terminal bolt to send power to the cab.

My fans, I'm running them to the hot terminal that I'm adding, but the switch must be wired to interrupt the ground, because they were straight on my battery and still needed a switch to work.

I've finished the 2 wires to the terminals, and made the wires for the other stuff, but time is limited, so I haven't got past that yet. They are all fused as you instructed.
dave`12 is offline   Reply With Quote