The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Coley · 11-07-2018, 01:09 PM

If it was a 1/2 ton...and thus a 15" rim, I'm pretty sure the inside cross diameter would be just over 10"..maybe up to 10-1/8"
If it is more than that across the inside, then it is probably for the 3/4 tons.

Ask the owner if can check with a tape measure to see if it is just over 10" (1/2 ton).....or an inch or two more (3/4 ton).

Coley

11-07-2018, 01:09 PM	#2
Coley Registered User Join Date: Oct 2011 Location: Victoria, B.C Posts: 3,794	Re: GMC hubcaps If it was a 1/2 ton...and thus a 15" rim, I'm pretty sure the inside cross diameter would be just over 10"..maybe up to 10-1/8" If it is more than that across the inside, then it is probably for the 3/4 tons. Ask the owner if can check with a tape measure to see if it is just over 10" (1/2 ton).....or an inch or two more (3/4 ton). Coley __________________ ....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL 1966 Chevy 1/2 ton (Florida- Red/white) 1972 Chevy 1/2 ton (California- Blue/white) 2005 Chevy Silverado HD2500/Duramax 2000 Dodge Ram 1500