Quote:
Originally Posted by nogaroa4
Hey Guys,
Just a general question about the swap, I'm looking at doing it on a 55. I hear horror stories about people mounting them wrong and having problems with alignment.
If you level your truck frame.
-Then brace the frame so it does not twist or flex.
-Cut the truck frame off at the proper length.
-Make sure it is still level.
-Then cut the camaro frame at the proper length and
-WHILE installing/welding the camaro frame make sure that the upper spring mounts are at the correct angle,
wouldn't that justify the proper install.
I mean isn't it that easy?
|
sounds like your going to be sucessful with your swap. good luck!