[75Dually]

I now have one side done! The below pics show the suspension at ride height, and the other 2 show the suspension at full drop. The only thing I have to change is where the bag is touching one of the mounting bolts on the top. I am going to tap the lower plate and use a short bolt so that the bag is touching nothing at all.

I tried to get the bag as straight as possible, but I compromised a bit on the lean angle so that in the lower portions of it's movement (when the vehicle is lowered) it was fairly straight. In the end I felt that it came out OK, so I am happy with the final result.

So tomorrow I am going to start on the opposite side and now that I did all the mock up on this side the passenger side should go a lot faster. Then I will tackle drilling all the mounting bolts 1" forward and moving the steering the same distance. Should be interesting...

Stay tuned...