Re: My Quest for Hot Rod Power Tour, Take 2
next was dismantle rearend. leaf springs are held on with 4 15/16" u-bolts. dont forget the axle vent tube is bolted to the frame on the pass side directly above the axle with 1/2" bolt. also pinion yoke to u-joint bolts 4 of then are 7/16" and then the brake line bolted to top of axle housing. each side line is 3/16" while the hold down bolt is 1/2". also shocks we 3/4" and 13/16" one front of axle one in rear.
|