Re: Starting 1966 Factory Short Bed Build, Bagged, 383 Stroker and Muncie M20 4-Speed
So, now after i install it, following every example of how to install a clutch correctly, by going in a star pattern, slowing tightening 1/4 turn at a time to finally 35lbs torqued and re-measure the heights and now the difference is .083 and you can see the difference.
I have unbolted and re-bolted it up several times, even just bolted up to where the clutch housing is just touching the flywheel and the bolts are tight, still off. Pics att
|