The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

clinebarger · 04-16-2017, 08:01 PM

Pull the governor out & check for the "head" being loose, Measure the "lands" if under .797".....Replace Governor, Check Governor "end-play"....Adjust to .030"-.040" Strike the center of the cover to tighten end-play.

Try .101 2nd feed hole, And .125" on 3rd with the accumulator blocked (They already blocked it by shimming the piston to bottom)

04-16-2017, 08:01 PM	#143
clinebarger Senior Member Join Date: May 2009 Location: Fort Worth, TX Posts: 6,370	Re: 4L80E & TH400 Tech. Pull the governor out & check for the "head" being loose, Measure the "lands" if under .797".....Replace Governor, Check Governor "end-play"....Adjust to .030"-.040" Strike the center of the cover to tighten end-play. Try .101 2nd feed hole, And .125" on 3rd with the accumulator blocked (They already blocked it by shimming the piston to bottom)