View Single Post
Old 03-25-2018, 06:33 PM   #5
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Thumbs up Re: Ramp truck winch??????????

Quote:
Originally Posted by lowbucktrucks View Post
I used a battery isolater When I wired my camper 12v deep cycle battery. It look like a ford starter solenoid, but is rated for contentious duty, seems like it was around $30, and allowed me to separate the batteries when I was camping so I didn't run the truck batteries down. You can wire them where 12v hot from ignition turns them on,or do like I did, and put a lighted switch on the dash (so its harder to screw up and leave them on.)
I've watched your builds with intrerest, Hi from upstate sc, I'm near Chesnee (northeast of Spartanburg)
Thanks, yes when this contactor opens it will cut the winch off from the truck battery. This will be done by as you stated a 12 volt lighted switch mounted on the dash so if it on it's charging if off it's not.
I may have to replace the alternator also to handle the amps????

Have you joined our Face Book club yet? You need to man we have a good bunch of people locally.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote