View Single Post
Old 12-23-2017, 11:51 AM   #41
cruizin01
Registered User
 
Join Date: Mar 2016
Location: Cbus, Ohio
Posts: 290
Re: '78 K20 to C10. Almost 20 years in the making.

Managed to get the rear end situated yesterday. I ran into a small issue with the rear flip brackets from Ridetech. I went ahead and put them in and will make adjustments as necessary if the pinion angle is off once I get the trans in and a driveshaft made.

Everything else bolted together pretty nicely. My exhaust clears the diff housing but not by much. I may have to "adjust" that if it proves to cause a problem over bumps and what not down the road. The truck definitely sits down in the rear. I'm sure that big block and 4l80e will bring the front down to level.






I guess I'm onto the transmission now. I need to install the programming kit. Ill go ahead and remove the TH350 from the engine as well. I need to get the axles and tc and trans cleaned up and posted for sale. They take up too much space.
cruizin01 is offline   Reply With Quote