|
Re: 67 gmc-project ball to the walls
So much for cleaning and going back together.
After closer inspection i burnt 2 cam lobes so throw that in the garbage and 2 of my rod bearings had funny wear on the outside of the crank. close look at the crank and you can see that the taper isnt right and it has funny tooling marks so its a boat anchor now. Should have never gone together in the first place with the crank that way.
Anyways i picked up a 66 327 with a good crank sunday so just some final cleaning and buy or track down some .060 pistons and then off to the machine shop.
In the mean time i started stripping my firewall.
|