View Single Post
Old 03-26-2017, 10:24 AM   #45
randy500
Account Suspended
 
Join Date: Jul 2016
Location: Tacoma, WA
Posts: 6,873
Re: Signal lamps help again

Quote:
Originally Posted by 66clow View Post
Here is where I am. Checking at the firewall wire going to rear. I have power at the Brown wire. Yellow wire have constant power and blinks with signal on. Dark green the power on constant and signals but is weak lamp with signal on but bright with hazard on. With light switch on both dk green and yellow bright, no power on Brown wire. If that is how it works?

LR lamp blinks and stop light. Nothing on right. Light switch on no difference at fire wall yellow green Brown all have power. Unsure if that is how it works.
I wonder if your describing this correctly.
Here is what you should have.

Lights off
No power to any thing at rear
Turn signal switched to left, should give power to yellow and then flash.
Turn signal switched to right, should give power to green and then flash.
Push on brake pedal and yellow and green should have power, if a signal switch is on that one will flash

Lights on
Everything the same as above except power to the brown wire. Which gives tail lamps, side marker lamps and license lamp power.
randy500 is offline   Reply With Quote