Re: DIY4X crossmember fitment
Quote:
Originally Posted by Jcfcamaro
My measurements were takin inside the frame rail just in front of the stock cross member . On a k10 the frame has to be the same in that area or you wouldn't be able to slide it forward for the 6 cylinder location. Hope this helps.
|
Right.. I think the frame should be the same height spanning the distance in between the lines below.
__________________
Dan
1970 C30- 350/SM465 133" WB, Soon to be a K series
1970 C10- LWB 250/3OTT, (sold)
1966 IH Scout 800- 152/T-90/Dana 20/ D27s
|