Thread
:
Retrospective 1978 Camaro Targa Top Project
View Single Post
11-17-2011, 04:09 PM
#
3
theastronaut
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,867
Re: Retrospective 1978 Camaro Targa Top Project
Quote:
Originally Posted by
NONHOG
I was thinking "oh boy" when I first started reading this thread, by the time more pictures came along. I like it! Never would have guessed.
Anxiously awaiting more pics!
You and me both! We needed a filler job at the shop and the owner was willing to pay what it was worth so we jumped on it. Not the normal job we do but needed work at the time. Glad we did it now!
Here's some more pics of it.
W/S frame fully trimmed and ready to start boxing it. Used 18g bent 90* and shaped with a shrinker/stretcher from Eastwood. I left some of the inner brace metal on the bottom side of the w/s frame for the filler panels to weld to.
Drilled some holes to plug weld the filler panels to the existing inner brace panel.
Test fitting the filler panels.
Welding the filler panels in place.
Welds ground down and sanded with a DA. The lip will be used to hold a rubber seal for the roof.
Edges trimmed.
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build
'65 C10 Highly Detailed Stock Restoration Thread
'78 Camaro Targa Roof Build
'55 International Metal/Body/Paint Work
'66 F100 Full Rotisserie Restoration
'40 Packard 120 Convertible Coupe Restoration
How To Restore and Detail an Original Gauge Cluster
How To Detail Sand Body Panels, Edges, Corners, Etc
Last edited by theastronaut; 12-08-2012 at
05:35 PM
. Reason: Fix dead pic links
theastronaut
View Public Profile
Find More Posts by theastronaut