Quote:
Originally Posted by Chaplain
You'll need the thread numbers as well. I came up with the following:
3/8x16x1" motor mount support to frame
3/8x16x1" motor mount bracket to support
7/16x14x1" (maybe slightly longer) cross member support
Hopefully someone will know chime in to verify. I simply cleaned up and painted those bolts to be reused.
|
Thanks Chaplain!
I was thinking of cleaning mine up as well. But since the rest of the frame is getting all new hardware I wanted to be consistent with the rest.
I think you are right that they are slightly longer. In my head (memory) I am thinking the 1.5" to 2". But probably not any longer. Between the frame and the support it cant be much thicker than 1/2"
Thanks again!
Paul