The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**davischevy** · 05-14-2017, 01:02 PM

Card board will close the hole easily, but holds a lot of dust that will turn loose when you spray.

Masking paper is the best choice. Mask the windows from the inside and Do the doors last. I start at the top and work down. The last piece is the tricky one. Weight a box down and set it in the cab next to the opening. Install the last bottom piece, reaching inside to attach the tape. Then the box will act as a backer to install the last piece of tape from the outside. No matter how you start, the method will change.

Good luck
Larry

05-14-2017, 01:02 PM	#7
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,790	Re: Painting cab question Card board will close the hole easily, but holds a lot of dust that will turn loose when you spray. Masking paper is the best choice. Mask the windows from the inside and Do the doors last. I start at the top and work down. The last piece is the tricky one. Weight a box down and set it in the cab next to the opening. Install the last bottom piece, reaching inside to attach the tape. Then the box will act as a backer to install the last piece of tape from the outside. No matter how you start, the method will change. Good luck Larry __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.